Benchtop Brinell Hardness Testing Machine

Brinell-Indention Optical Measurement System QB-310

Introduction:

• The benchtop Brinell hardness indentation measurement microscope is an automated Brinell hardness indentation Optical measurement system developed for Windows based operating systems that can be used with any commercially available Brinell hardness tester to replace the traditional mechanical reading microscope and automatically measure the Brinell hardness value of a specimen.
• Brinell indentation Optical measuring system adopts advanced machine vision technology, through the digital microscope to photograph the indentation left by the specimen after the test force is loaded by the Brinell hardness tester, which can measure the Brinell hardness value of the specimen tested by different indenters of 10mm, 5mm, 2.5mm, 1mm.
• During the measurement process, there is no need for human to determine the indentation edge, no need for human to record the indentation length data, no need for human to find the hardness comparison table, automatic measurement, automatic recording, automatic saving, automatic generation of hardness test chart, and can set the upper and lower limits, automatic Ng and Pass determination.
• Professional testers use mechanical reading microscope to measure hardness manually in about 2 minutes each time, the measurement process will produce multiple transmission errors, the measurement efficiency is very low, while the use of Brinell indentation Optical measurement system, without any professional and technical personnel, from the president of the company, down to the freshman general workers, can easily in less than 1 second to the indentation of accurate measurement.
• Continuous zoom lens is used to make the magnification switching more effortless and faster.

Technical Specification

Benchtop Brinell Hardness Testing Machine

Portable Brinell Hardness Testing Machine

Benchtop Brinell Hardness Testing Machine Images